Fender Twin Amp

How To Choose The Best Fender Twin Amp

What is the Purpose Of A Fender Twin Amp?

The Fender Twin was introduced by Fender in 1957. The idea behind the design was to create a smaller version of the famous Fender Bassman amplifier with two channels. In fact, the original model was called "Twin" because there were only two channels. But since then, many other manufacturers have copied the concept and created models with more than two channels. Today, most modern amplifiers have four or six channels.

Fender Twin Amplifier Design

In order to understand the reason behind the development of the Fender Twin, we must take a step back into history. At the end of World War II, the government began to encourage the production of consumer goods to replace those lost during the war. One of these products was the transistor radio. Transistors were small enough to fit inside radios, so engineers decided to put them in stereo receivers. However, the problem was that the volume control knob was too big to be placed next to the speaker grille. To solve this issue, engineers came up with the idea of placing both speakers in the same enclosure.

How Does the Fender Twin Amplifier Work?

To achieve this goal, engineers designed a circuit where each channel has its own power supply and preamp section. The output stage consists of two EL34 vacuum tube rectifiers.

The front panel controls consist of five knobs: Volume, Gain, Tone, Master Volume, and Presence. There are no effects units included.

History of the Fender Twin

Although the Fender Twin was released in 1957, it wasn't until 1959 that the company started selling the product. During this period, the Fender Twins were very popular among musicians who wanted something between the size of a single-channel bass cabinet and the full-sized Fender Bassman. Since the introduction of the Fender Twin, several companies have produced similar designs. Some examples include the Vox AC30 and the Marshall JMP100.

Where Can You Find Them Now?

Today, the Fender Twin is still being manufactured by Fender. Although the number of channels available varies depending on the model, most have four channels.

The Importance of Purchasing a Quality Fender Twin Amp

It is important to purchase a high-quality amplifier because it will last longer and sound better. An inexpensive amplifier could be damaged by being dropped or hit with something heavy. If you're going to invest money into an amplifier, you might as well go for a good one.

Quality Amplifiers Are More Durable

An expensive amplifier has more parts inside of it so it lasts longer. For example, the power supply is built into the cabinet which makes it stronger and more durable. Also, there are fewer moving parts in the amplifier which reduces the chance of failure. In addition, higher quality amplifiers have a larger speaker cone which produces a louder volume.

They Sound Better

High-quality amps produce a richer tone and cleaner sound. High-end amps have a smoother response and a wider frequency range. With a high-quality amp, you'll hear more detail and clarity in your music.

Amplifier Repair Is Easier

Repairing a low-quality amp is difficult. There are many components involved that require special tools and skills. However, repairing a high-quality amp is easier. All you need is a screwdriver and maybe a soldering iron.

Less Maintenance

Low-quality amps require constant maintenance. Over time, dust collects in the vents and causes problems. To fix these issues, you must disassemble the entire unit and vacuum everything out.

More Features

Higher-quality amps have more features. Some models include effects pedals, footswitches, and speakers. Other features include headphone jacks, USB ports, and digital inputs.

Ease of Use

With a high-quality amp, you'll enjoy using it right away. Low-quality amps take a while to warm up and adjust properly. Once you've adjusted the settings, however, you'll see why you paid top dollar for it.

Faster Response Time

A high-quality amp responds faster than a lower-quality model. Higher-quality amps respond quickly to changes in input signals. Lower-quality amps take a little bit longer to react.

How Do You Know Which One Is Right For You?

There are different types of amplifiers available. Each type offers its own set of pros and cons. Before making a decision, think about what kind of music you play and where you plan to use the amp.

Which Type Is Best For Me?

Solid state amp - Solid state amps are smaller and lighter than tube amps. They are great for portable applications.

Features To Look For When Buying A Fender Twin Amp

Fenders are known for being great amps with tons of tone potential. But there are many different types of Fenders available today. Some are more affordable while others are quite expensive. There are several features that you should be aware of before purchasing a Fender amp. Here are some of those features.

The Reverb

This is probably the most important feature to look for in a Fender amp. The reverb controls allow you to adjust the amount of echo and delay applied to the sound coming out of the speaker. If you're playing electric guitar, you'll want to set the reverb to "0" so you hear only the direct signal. If you play acoustic guitar, you'll want to turn the reverb down so you can hear the natural reverberation of the room where you're performing.


Another very important factor to take into consideration is the wattage rating of the amplifier. Most Fenders fall between 100 watts and 300 watts. However, higher-wattage amplifiers produce louder sounds. So if you plan on using headphones, you might want to go with a lower wattage amp.

Channel Switching

Most Fenders come equipped with two channels; however, some models include three or four channels. Channel switching lets you switch back and forth between the two channels. This is useful because sometimes you'll want to listen to both channels simultaneously. Also, if you're recording multiple instruments, channel switching makes it easier to record each instrument separately.

Effects Loop

An effects loop gives you access to additional audio processing devices. Effects loops let you apply distortion, chorus, flange, phaser, tremolo, vibrato, wah, and other effects. Many Fenders come with built-in effects loops. Others require you to purchase separate units.


Solid state speakers are typically smaller and lighter than tube speakers. Tube speakers are generally larger and heavier. Both types of speakers provide excellent quality sound.

Power Supply

Some Fenders come with internal power supplies. Internal power supplies eliminate the need for external power cords. However, some Fenders still require an external power supply. External power supplies are necessary if you plan on plugging your amp into a wall socket.


Many Fenders come with cabinets. Cabinets give your amp a finished appearance. They also help reduce unwanted noise by absorbing stray vibrations.


Finally, Fenders come with onboard pedals. Pedal boards contain stomp boxes which are small electronic circuits designed to simulate certain musical effects. Stomp boxes are perfect for adding special effects to your music.

Different Types of Fender Twin Amp

The tubes are wired together so they share the same ground. Each channel has its own volume control which controls the amount of gain applied to both channels. In addition, each channel has its own tone control which adjusts the sound characteristics of each channel independently.

Fender Twin Reverb

This style of amp was originally designed by Leo Fender in 1951. It became very popular during the 1960s and 1970s. It is still manufactured today. There are many different models available including single-channel amps, combo amps, and four-channel amplifiers.

Twin Reverb Watt

In 1957, Fender introduced the Model 100 series of amps. These amps featured a unique design where the speaker cabinet was mounted inside the body of the amp. This allowed the speakers to be placed closer to the listener giving a more intimate listening experience. The original model 100 amps came equipped with three 10 watts per channel. Later versions included 15 watts per channel.

Watt 2x12

During the late 1950s, Fender began producing solid state amps. One of these amps was the Model 101. This amp was powered by six 6L6 vacuum tubes. The 101 was discontinued in 1966. However, the 101 nameplate continued to appear on other solid state amps produced by Fender throughout the 1960s.

2X12 Inch Guitar

Many musicians prefer using smaller sized guitars rather than full size instruments. For example, electric bass players typically play small basses while rock guitarists might choose a 12 string guitar. Some artists prefer the intimacy of playing a smaller instrument. Others enjoy the challenge of learning songs on a larger scale instrument. Whatever the reason, there are several advantages to choosing a smaller guitar. First, smaller guitars require less room to store. Second, smaller guitars are easier to transport. Third, smaller guitars are generally lighter weight than large ones. Finally, smaller guitars are cheaper to purchase.